cnc machine solutions adopts mechatronics design, bed and foot as the whole structure, bed tilt back 30 degrees, compact structure, strong rigidity, good shock resistance, convenient chip removal. Machine tool spindle adopts spindle unit, frequency conversion or servo main motor, spindle speed is high and can achieve stepless speed regulation, guide rail adopts centralized automatic lubrication device and fully enclosed protection, sufficient lubrication, safety and long service life.

cnc machine solutions Installation and use:

1. In order to ensure the working accuracy of the machine tool, adjust the anchor bolt or shock absorber support during installation to ensure the level of the machine tool and not distort the guide rail.

2, the installation and commissioning work is completed, we must first check whether the rotating part is flexible and whether the electrical circuit is reliable, and then the operation test, the test time is less than 2 hours, and the test can be entered into the trial processing.

3. The main shaft bearing will have a gap after the machine tool is used for a period of time, and the user can adjust it appropriately according to the use speed. The clearance is too small, easy to lead to bearing heating; Too much clearance will affect the accuracy of the workpiece and the surface roughness. By adjusting the lock nut tightness of the front and rear bearings of the spindle, the bearing clearance is maintained at 0. 006mm is preferable.

4, the size of the machine tool is equipped with plug iron, after a period of use can be adjusted by adjusting the plug iron to adjust the large and small drag plate gap, should be flexible operation, does not affect the processing accuracy is appropriate.

5, usually should do a good job of machine maintenance and cleaning work.

6, the sliding part of the machine tool must be fully lubricated, each shift (8 hours) should be filled with mechanical oil 2-4 times, bearing lubrication should be replaced every 300 or 600 hours.

In order to ensure the personal safety of cnc machine tool operators, reduce man-made mechanical accidents, and ensure smooth production, cnc machine solutions operating specifications must be strictly followed by all machine tool operators.

1, before the operation to wear good protective equipment (work clothes, safety helmet, protective glasses, masks, etc.), women should be involved in the braid hat, not exposed, is strictly prohibited to wear slippers, sandals, operation, the operator must tie the cuffs, tighten the skirt, is strictly prohibited to wear gloves, scarves or open clothes, to prevent the hand involved in the rotating chuck and the knife between.

2. Before operation, check whether the parts and safety devices of the machine tool are safe and reliable, and check whether the safety and reliability of the electrical part of the equipment is good.

3, the workpiece, fixture, tool, tool must be firmly installed. Before running the machine tool, observe the surrounding dynamics, and remove the objects that hinder the operation and transmission, and confirm that everything is normal before operation.

4. When cnc machine solutions are running, it is not allowed to adjust, measure the workpiece and change the lubrication method to prevent the hand from touching the tool and hurting the finger. In case of danger or emergency, press the red "emergency stop" button on the operation panel immediately, the servo feed and the main shaft will stop working immediately, and the machine will stop all movement.

cnc machine solutions https://www.zjshuangzheng.com/